Continuous-time photon-stimulated desorption spectroscopy studies on soft x-ray-induced reactions of CF3Br adsorbed on Si(111)-7×7

Continuous-time core-level photon-stimulated desorption (PSD) spectroscopy was used to study the soft x-ray-induced reactions of CF(3)Br molecules adsorbed on Si(111)-7×7 near the Si(2p) edge (98-110 eV). The monochromatic synchrotron radiation was employed as a soft x-ray light source in the photon-induced reactions and also as a probe for investigating the produced fluorination states of the bonding surface Si atom in the positive-ion PSD spectroscopy. Several different surface coverages were investigated. The PSD spectra from the low-CF(3)Br-covered surfaces show the production of surface SiF species, while those from the high-CF(3)Br-covered surfaces depict the formation of surface SiF, SiF(2), and SiF(3) species. The photolysis cross section of the submonolayer CF(3)Br-covered surface is determined as ～4.3×10(-18) cm(2). A comparison with the results on CF(3)Cl/Si(111)-7×7 surface is discussed.     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

O-H stretch overtone excitation of ethyl hydroperoxide conformers

We present laser photoacoustic spectra of ethyl hydroperoxide (EHP) for 3-6 quanta of O-H stretch. Spectra are consistent with ab initio spectral simulations that take into account the influence of torsional motion about the O-O bond on O-H stretch overtone excitation. Experimental and simulated spectra share two trends. First, spectral features due to torsional excitation, including hot bands, become more prominent with increasing O-H stretch excitation, as has been shown previously for similar molecules such as methyl hydroperoxide. Second, contributions from the two different EHP conformers become clearly distinguishable at higher O-H stretch excitation, mainly due to the role of torsional motion. Results are consistent with a higher energy separation (330 cm(-1)) between the lower energy anti and the higher energy gauche conformers than predicted by electronic structure calculations (137 cm(-1)). Calculated absorption intensities are consistently higher than experimental values by ~30% but within the experimental uncertainty. With each additional O-H stretch overtone, the dropoff in calculated integrated absorption intensities at room temperature becomes less extreme, with a 14-fold dropoff from 3ν(OH) to 4ν(OH) and an 8-fold decrease from 5ν(OH) to 6ν(OH).     

Absorption and transport properties of ultra-fine cellulose webs

Characterization of transport and absorption properties of nanofiber webs is a challenge, because in many cases the material is soft and cannot withstand the stresses exerted by the standard instruments. In this paper, we report on development of a new technique for materials characterization. We propose to conduct wicking and permeability experiments for full characterization of the nanowebs. As an example, we used electrospun cellulose acetate nanowebs. The wicking experiments showed very good reproducibility, demonstrating the square-root-of-time dependence of wetting front position vs time. The prefactor depends on a product of capillary pressure and materials permeability. We developed a technique to independently measure the permeability of small samples of nanowebs. Wicking and permeability data allow one to estimate the pore size; SEM micrographs confirmed the obtained estimates of pore radius. In general, the proposed method allows one to characterize the transport and absorption parameters of the nanofibrous materials for which the standard procedures are inapplicable.     

Excited-state intramolecular proton transfer molecules bearing o-hydroxy analogues of green fluorescent protein chromophore

o-Hydroxy analogues, 1a-g, of the green fluorescent protein chromophore have been synthesized. Their structures and electronic properties were investigated by X-ray single-crystal analyses, electrochemistry, and luminescence properties. In solid and nonpolar solvents 1a-g exist mainly as Z conformers that possess a seven-membered-ring hydrogen bond and undergo excited-state intramolecular proton transfer (ESIPT) reactions, resulting in a proton-transfer tautomer emission. Fluorescence upconversion dynamics have revealed a coherent type of ESIPT, followed by a fast vibrational/solvent relaxation (<1 ps) to a twisted (regarding exo-C(5)-C(4)-C(3) bonds) conformation, from which a fast population decay of a few to several tens of picoseconds was resolved in cyclohexane. Accordingly, the proton-transfer tautomer emission intensity is moderate (0.08 in 1e) to weak (～10(-4) in 1a) in cyclohexane. The stronger intramolecular hydrogen bonding in 1g suppresses the rotation of the aryl-alkene bond, resulting in a high yield of tautomer emission (Φ(f) ≈ 0.2). In the solid state, due to the inhibition of exo-C(5)-C(4)-C(3) rotation, intense tautomer emission with a quantum yield of 0.1-0.9 was obtained for 1a-g. Depending on the electronic donor or acceptor strength of the substituent in either the HOMO or LUMO site, a broad tuning range of the emission from 560 (1g) to 670 nm (1a) has been achieved.     

TGBA phase in a series of propionates containing two stereocenters

A homologous series of chiral materials, (R)-2-pentyl (S)-2-(6-(4-(4'-alkoxyphenyl)benzoyloxy)-2-naphthyl)propionates (R,S)PmPBNP (m = 7-14), derived from a naphthalene ring as part of the core structure in conjunction with a chiral tail containing two stereocentres has been synthesized for the investigation. The twist grain boundary smectic A (TGB_A) and smectic C (TGB*_C) phases were characterized by the microscopic textures of compounds packed in two untreated glass slides, Cano wedge cell, or homogeneously aligned cell. It was found that the occurrence of these phases depend remarkably on the nature of alkyl chain length m; in the case of shorter alkyl chain length (m = 7-10), the TGB_A phase behaves as a metastable-like phase mediated between N and S_A phases in a short temperature range, whereas in the longer chain length (m' 11-14), both the TGB_A and TGB_C phases become thermodynamically stable phases with a wide temperature range. Consequently, this series of chiral materials resulted in two different mesophase sequences: N-TGB_A-S_A-S_Cand N-TGB_A-TGB_C. A kind of parquet texture displaying two types of domain with different relative directions of the smectic layer normal was found in the S phase from the materials (m = 9-14) packed in 2 μm homogeneously aligned cells and cooled down from the isotropic liquid without applying an electric field. The magnitudes of spontaneous polarization (P_s) in the S_C and TGB_C phases showed that the P_s values are nearly the same for all compounds at the same temperature below the Curie point. Dielectric measurements revealed no significant occurrence of soft mode switching in the TGB_A phase.     

PEGylation of chitosan for improved solubility and fiber formation via electrospinning

PEG-N-chitosan and PEG-N,O-chitosan were synthesized via reductive amination and acylation of chitosan, respectively. The structures were confirmed by FTIR and H¹NMR. The extents of PEGylation increased with reducing chain lengths of either chitosan (M _v = 137–400 kDa) or poly(ethyelene glycol) (PEG, M _n = 500–2 kDa). Water solubility were easily achieved at degree of substitution (DS) as low as 0.2 for either derivtive whereas the PEG-N,O-chitosan at DS = 1.5 was soluble in organic solvents, including CHCl₃, DMF, DMSO and THF. None of the aqueous solutions of PEG-N-chitosan or PEG-N,O-chitosan alone could be electrospun into fibers. Electrospinning of PEG550-N,O-chitosan145 at 25% in DMF produced fibrous structure intermixed with beads. The efficiency of fiber formation and the uniformity of fibers were improved by increasing the solution viscosity using a cosolvent or reducing the solution surface tensions with a non-ionic surfactant. Ultra-fine fibers with diameters ranging from 40 nm to 360 nm and an average diameter of 162 nm were efficiently generated from electrospinning of 15% PEG550-N,O-chitosan145 in 75/25 (v/v) THF/DMF cosolvents with 0.5% Triton X-100^TM.